Enter test piece data above horizontal line. Click the 'Calculate Approval
Range' button and the range of approval will appear below it. Note,
Fillet weld leg length must be left blank unless the test weld is a fillet
weld.
The thickness of weld deposit is to determine the contribution made
by each welding process when processes are deleted from a Procedure or
when processes from other procedures are combined.
For example if a plate butt weld 10mm thick made with a 3mm TIG weld
and filled with MMA is required to make an MMA fillet weld, Plate thickness
should equal 10mm and Thickness of weld deposit 7mm.